Resources

|
configure aaa for radius

Learn how to configure AAA for radius authentication. A detailed example is provided along with a diagram that is easy to understand. In this example, the RADIUS server is 192.168.10.1 and we want to configure AAA on the router and switch so that remote access is authenticated through the RADIUS server with the local database
Read More

|
configure dmvpn phase 2 logical

Learn how to configure DMVPN Phase 2 with EIGRP on your Cisco routers. A detailed example is provided along with a diagram that is easy to understand. When you have multiple sites connected over a WAN that you need to set up secure connectivity for, the DMVPN is one of the most versatile, scalable, and robust
Read More

|
configure translation rules

One of the most common uses for translation rules is for incoming calls from a PRI connection where you have a set of DID numbers that you need to get to your office phones. In this example, the cell phone with (587) 123-4567 is dialing either 5872152001 or 5872152002 and we need to configure translation
Read More

|
configure central dhcp processing

When using FlexConnect Local switching on a WLAN, DHCP is processed locally because client traffic egresses from the AP. While this is normally how you would do it for multiple remote locations, sometimes you might want to configure central DHCP processing. When the central DHCP option is enabled from a FlexConnect group, the DHCP request
Read More

|
configure SSL VPN

Learn how to configure SSL VPN on your Cisco ASA. A detailed example is provided along with a diagram that is easy to understand. In this example, we will configure an SSL VPN on your Cisco ASA so you can remotely access your network using the Cisco Anyconnect client. This is a working configuration using
Read More

|
password recovery

Per-tunnel QoS is needed for DMVPN networks to limit the amount of bandwidth being sent from the hub to the spoke based on the spoke’s bandwidth capacity. Since all hub to spoke communication go through a single tunnel interface, and spokes can have different bandwidth capacity on their WAN links, you need to configure a way
Read More

|
How to configure cellular WAN EHWIC on a Cisco router

Learn how to configure cellular WAN EHWIC cards for your Cisco routers. A detailed example is provided along with a diagram that is easy to understand. Cellular EHWIC cards provide a cellular internet connection for a router. They are useful for sites where you providers don’t have the cabling infrastructure to support your needs, or where
Read More

|
configure site-to-site vpn tunnel

Learn how to configure Site-to-Site VPN tunnel on your Cisco routers. A detailed example is provided along with a diagram that is easy to understand.   In this example we will configure a site-to-site VPN tunnel to provide network connectivity between the two LAN’s 192.168.1.0/24 and 192.168.3.0/24. Site-to-Site VPN tunnels aren’t used often anymore in favor
Read More

|
password recovery

Learn how to configure a basic QoS policy on your Cisco routers. A detailed example is provided along with a diagram that is easy to understand. In this example, we will configure a basic QoS policy in a scenario that is commonly used. The WAN interface is configured for bandwidth of 10 Mb, and the WAN
Read More

|
configure qos quality of service

Learn the basics of Quality of Service and it’s importance in networks. A detailed example is provided along with a diagram that is easy to understand. This is an introduction to QoS for beginners. Quality of Service (QoS) is defined as the measure of transmission quality and service availability of a network. Its fundamental objective is to
Read More